Product Description
JBtuned EP3 Civic Full Fuel System with Return Line
This is our complete fuel system replacement for the EP3 Civic Platform. This kit has alot of options to choose from so please read over everything to make sure you are getting the exact setup you need and if you have any questions please contact us before you place an order. See Drop Downs Explained for some explanation of what your picking.
Line type - Currently we only offer this kit with PTFE Braided line. This line is designed to work with almost any fuel on the planet. You can use it with pump 85 91 and 93, e85, c16, M5, M1, Q16. Again, basically any fuel you have ever heard of.
This kit replaces all of your OEM factory hardline from the gas tank to the fuel rail with Braided Fuel Line in either 6AN or 8AN and adds a 6AN Return Line from the fuel rail back to the tank. The kit was designed to mount the fuel pressure regulator on the left side (USDM Driver) of the fuel rail.
Going turbo? We kept this in mind. We designed this kit thinking that we would be running a sidewinder manifold. We keep the lines low and as far away from the heat as possible. With that said. each manifold/ car is different and if you find that the fuel lines are close to the turbo we highly suggest that you insulate them from the heat as the braid will melt if exposed to extreme turbo heat temperatures. This is true for any line from any company.
Things to consider before buying.
- You will need to remove the evap system in the car to make room for the fuel filter.
- You will need hondata or Ktuner or some other engine management because you removed the evap system and other sensors and you will need to tune for all the extra fuel your getting.
- Requires aftermarket fuel Rail and Regulator
- Kit comes with a fitting to connect your regulator directly to the rail. *Regulator must be 6AN or 8AN port*
- Reuse the OEM C Clamps under the car to hold the lines with minor modification.
Drop Downs Explained
- What fuel rail are you using: We need to know because different rails require different fittings.
- Feed Line Size: You have 6AN or 8AN is is your choice. Your return will always be 6AN.
- JBtuned Fuel Pump Hanger upgrade Kit: This is a fitting kit that is used to modify your OEM fuel sending unit to accept our kit. It included 2 lines, 1 for the fuel pump feed and 1 for the return line. The clamps needed for those lines, bulkhead fitting, a quick connect fitting and lastly a bulkhead for your fuel pump wires. See images for more clarification if need. We highly recommend this if you do not already have a modified/aftermarket sending unit. The EP3 and RSX hangers require alot of modification. We have a guide here. In this section you tell us which fuel pump you are using because this kit changes based on the fuel pump.
- Regulator Inlet Size - This helps us provide you with the correct fittings you need for your install. If your unsure what the size is please send us an email and we will help you figure it out.
- Flex Fuel Sensor Version: This is not for the actual Flex Fuel sensor. This tells us that you want to run a flex fuel sensor. We then make the kit with space for you to add your own flex fuel sensor if you want flex fuel tuning options. We have to make the single return line into two lines at a specific spot where we have found works the best. We do sell Flex Sensors if you need one. See links below.
What Comes with the Base Kit:
- Fuel Lines - ready to install
- Filter and Fittings
- Fitting for regulator to mount to fuel rail
- Fuel Rail Fittings
- P Clamps qty: 3
Items NOT Included in our kits that you might need:
- Flex Fuel Sensor: Click Here
-
Flex Fuel Sensor Fittings: 2 fittings that slide onto your flex fuel sensor and convert it to 6an.
-
Fuel Pressure Regulator: Click Here: This kit requires a stand alone fuel pressure regulator, Here is the one we use.
Install Tip's
See images for some install examples.
You will need to remove the OEM Evap System. This will provide you with alot of space for mounting your new filter and flex fuel sensor.
Unlike our Teg and Civic Kits we reuse the OEM C Clamps under the car. (These are the plastic clamps that hold your fuel and brake lines up). They do require modification (dremel cutting) for our 6 AN return line to fit in properly. These can be brittle and break easy. Good news is they are cheap to replace. Honda Part# 91596-SDA-A01.
If possible, retain OEM Firewall heat shields
Running Walbro 400 450 525 or any other larger body pumps?
Need help with the install? See Tech Help
